SC0880

SC0880 is a Raspberry Pi 7” touch screen display. The 7” Touch screen monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touch screen drivers with support for 10-finger touch and an on-screen keyboard will be integrated into the latest Raspbian OS for full functionality without a physical keyboard or mouse.

• 7” touch screen display ( screen dimensions: 194mm x 110mm x 20mm (including standoffs))
• Viewable screen size of 155mm x 86mm
• Screen resolution of 800 x 480 pixels
• 10 finger capacitive touch
• Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port
• Adapter board is used to power display and convert parallel signals from DSI port on Raspberry Pi
• Will require the latest version of Raspbian OS to operate correctly

Obsah

7” Touch screen display, adapter board, DSI ribbon cable, 4 x stand-offs and screws (used to mount the adapter board and Raspberry Pi board to the back of the display, 4 x jumper wires (used to connect the power from the Adapter Board and the GPIO pins on the Pi so the 2Amp power is shared across both units).

Poznámky

Note: The Raspberry Pi board and Power Supply are not included in this kit and should be purchased separately