AD5664RBCPZ-3R2

AD5664R is a low power, quad channel, 16-bit buffered voltage out DAC. The on-chip reference is off at power-up, allowing the use of an external reference; all devices can be operated from a single 2.7V to 5.5V supply. The internal reference is enabled via a software write. The part incorporates a power-on reset circuit that ensures the DAC output powers upto 0V and remains there until a valid write takes place. The part contains a per-channel power-down that reduces the current consumption of the device to 480nA at 5V and provides software-selectable output loads while in power-down mode. The low power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. It is used in applications such as process controls, data acquisition systems, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, programmable attenuators.

• Guaranteed monotonic by design, output noise spectral density is 120nV/√Hz typical
• Per channel power-down, serial interface upto 50MHz
• Relative accuracy is ±8LSB typical at (VDD = 4.5V to 5.5V)
• Differential nonlinearity is ±1LSB maximum at (VDD = 4.5V to 5.5V)
• Gain temperature coefficient is ±2.5ppm typical at (VDD = 4.5V to 5.5V)
• Gain error is ±1.5% of FSR maximum at (VDD = 4.5V to 5.5V)
• Output voltage settling time is 4μs typical at (VDD = 2.7V to 5.5V)
• Slew rate is 1.8V/μs typical at (VDD = 2.7V to 5.5V)
• Digital-to-analogue glitch impulse is 10nV-s typical at (VDD = 2.7V to 5.5V)
• Operating temperature is -40°C to +105°C, package style is 10-lead LFCSP_WD

Poznámky

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party