ACHS-7195-500E

ACHS-7195-500E is a fully integrated hall-effect-based isolated linear current sensor designed for AC or DC current sensing in industrial, commercial, and communications systems. Inside each ACHS-719x IC is a precise, low-offset, linear hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field that the differential Hall sensors convert into a proportional voltage. Device accuracy is optimized across the operating ambient temperature through the close proximity of the magnetic signal to the Hall sensors. A precise, proportional voltage is provided by the low-offset, chopper-stabilized CMOS Hall IC, which is programmed for accuracy after packaging. Applications include low-power inverter current sensing, eBikes, motor phase and rail current sensing, solar inverters, chargers and converters, switching power supplies.

• Output voltage proportional to AC or DC currents, ratiometric output from supply voltage
• 5V single supply operation, low-noise analog signal path
• Factory-trimmed for accuracy, extremely stable output offset voltage
• Near-zero magnetic hysteresis, maximum output error of ±6.0% across operating TA
• >25kV/µs min common mode transient immunity, UL/cUL, IEC/EN 62368-1 approval
• Primary conductance resistance is 0.7mohm typ at (TA = +25°C)
• 80KHz typ -3dB bandwidth at (TA = +25°C), 13mA typ supply current at (VDD = 5V, output open)
• 50A typ optimized accuracy range at (TA = +25°C)
• 40mV/A typ sensitivity at (-50A ≤ IP ≤ 50A), 1.7mV typ output noise at (BW = 2KHz)
• Ambient operating temperature range from -40 to +110°C, SO-8 package

Výstrahy

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.