ACRYLIC CONFORMAL COATING , 400ML

Acrylic conformal coating is a transparent, quick-drying, insulating and protective coating based on acrylic resins. A low-viscosity, solvent-drying, acrylic-based conformal coating with excellent insulating properties. The lacquer is transparent and flexible. It has a durable adhesion in the temperature range from -40°C to +60°C and can be used for a short period of time up to +100°C maximum. It protects printed circuit boards and surfaces from humid inorganic acid or caustic vapours. Specially developed to protect printed circuit boards. It prevents electrical leakages and short circuits. As a low-viscosity fixing and insulating lacquer, Acrylic conformal coating can also be used as extra/after insulation of coils and transformers and reduces operational noise.

• 400ml fill size
• ±1.4m²/400ml spray coverage at 20μm, calculated
• 10-20mPas viscosity bulk
• Flashpoint <lt/>0°C
• Drying time at 20°C (dry to touch) ±20minutes
• Transparent film colour
• Dielectric strength <gt/>80KV/mm (after 24hrs drying at ambient temperature, thickness 20-40μm)
• Anti-corrosion
• Surface resistivity at 20°C <gt/>10¹³
• Volume resistivity at 20°C <gt/>10¹³cm

Notes

Stored at normal ambient temperatures and has a shelf life of not less than 4 years with correct storage. Aerosols should always be stored below 50°C, away from direct heat and flame.