LNK584DG-TL

LinkZero™-AX combines extremely low standby/power-down energy use with the industry’s lowest component count standby supply solution. Below 3mW at 230VAC in power-down (PD) mode meets IEC 62301 definition of zero power consumption and is immeasurable on most power meters. LinkZero-AX is set into power-down mode using an external signal to pull the FEEDBACK pin high for 2.5ms. Such an external signal can be generated by a system micro controller or infrared controller. In power-down mode the BYPASS pin remains regulated allowing the LinkZero-AX to be woken up with a reset pulse to pull the BYPASS pin below a reset threshold (1.5V). Ultra low system consumption is therefore achieved without needing to disconnect the input voltage with a relay. Typically used in ultra low consumption isolated or non-isolated standby and auxiliary supplies.

• 3W (open frame) at 230VAC ±15% and 3W (open frame) at 85-265VAC output power
• Zero standby consumption integrated off-line switcher, low system cost with zero standby consumption
• EcoSmart™ energy efficient, suitable for low-cost clampless design
• Simple system configuration yields zero consumption standby/power-down with user controlled wake-up
• Very tight IC parameter tolerances improves system manufacturing yield
• Frequency jittering reduces EMI filter cost
• Hysteretic thermal shutdown protection, automatic recovery reduces field returns
• Simple ON/OFF control, no loop compensation needed
• Easily meets all global energy efficiency regulations with no added components
• Standby/power-down consumption less than 3mW at 325VDC input

Výstrahy

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.